OAKDALE Airport (O27) in Oakdale, California has 1 runway. Runway 10/28 is 3,013 ft long and 75 ft wide. The surface is asphalt. The published magnetic headings are 111° and 291°. No ILS runway ends are published for this field. The field elevation is 236.5 ft MSL.
This is an uncontrolled airport. No control tower is listed. Pattern altitude is not published, so use standard traffic pattern judgment for light piston operations and verify the current FAA Chart Supplement before flight. No LAHSO notes are published. No runway-specific noise abatement notes are published.
Wind & favored runway
Favored end is picked from the current METAR wind at O27.
Pattern entry · RWY 10
LEFT TRAFFICAll runways
Traffic pattern
Pattern altitude is not published for O27. Use standard 1,000 ft AGL for light piston aircraft unless local procedures or ATC say otherwise. This airport has no control tower, so pilots self-announce and self-sequence in the pattern. The only runway is 10/28. Runway 10 uses magnetic heading 111°. Runway 28 uses magnetic heading 291°. No right-traffic exception is published. Check the current FAA Chart Supplement before you go.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.