Higginsville Industrial Muni (KHIG) has 1 runway. Runway 16/34 is 4,400 ft long and 75 ft wide. The surface is asphalt. Runway headings are 165° and 345° magnetic. No ILS runway ends are published for this field.
This is a non-towered airport. The field elevation is 840 ft MSL. No runway-specific noise abatement notes are published. No LAHSO notes are published. Pilots should use the current FAA Chart Supplement for the latest airport data before flight.
Wind & favored runway
Favored end is picked from the current METAR wind at KHIG.
Pattern entry · RWY 34
LEFT TRAFFICAll runways
Traffic pattern
Pattern altitude is not published. Use standard 1,000 ft AGL for light piston traffic unless local procedures say otherwise. At this non-towered field, pilots self-announce and sequence themselves in the pattern. Runway 16/34 is the only runway in use, so pattern direction follows the active runway. Check the current FAA Chart Supplement before departure for any airport-specific notes.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.