Huntington Muni in Huntington, Indiana has 1 runway. Runway 10/28 is 5,003 ft long and 75 ft wide. The surface is asphalt. Runway headings are 92° and 272° magnetic. No ILS runway ends are published for this field.
This is a non-towered airport. The field elevation is 805.7 ft MSL. No runway-specific noise abatement notes are published. No LAHSO notes are published. Pilots should use the current FAA Chart Supplement for the latest airport data before flight.
Wind & favored runway
Favored end is picked from the current METAR wind at KHHG.
Pattern entry · RWY 10
LEFT TRAFFICAll runways
Traffic pattern
Pattern altitude is not published. For light piston operations, use the standard 1,000 ft AGL unless ATC or other published guidance says otherwise. This is a non-towered field, so pilots self-announce and sequence visually. Runway 10/28 is the only runway, so pattern work will center on that strip. No right-traffic exception is published. No runway-specific pattern notes are published.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.