Harding County (9D2) in Buffalo, South Dakota has 1 runway. The runway is 12/30. It is 3,900 ft long and 60 ft wide. The surface is asphalt. The longest runway is 3,900 ft, so there is no runway length split to compare here.
No control tower is published for this field. No ILS runway ends are published. That means you should plan for non-precision operations only, based on the current FAA Chart Supplement and the published airport data. No LAHSO notes are published. No noise abatement notes are published either. For current winds and weather, check aviationweather for live METAR/TAF before departure.
Wind & favored runway
Favored end is picked from the current METAR wind at 9D2.
Pattern entry · RWY 30
LEFT TRAFFICAll runways
Traffic pattern
Pattern altitude is not published. For light piston aircraft, use the standard 1,000 ft AGL pattern unless local guidance says otherwise. That puts the pattern near 3,891 ft MSL at this field elevation of 2,891 ft MSL.
No tower is published for 9D2, so pilots should self-announce and sequence visually. No right-traffic exceptions are published. No runway-specific pattern notes are published. Keep your pattern work simple and verify the runway in use before joining.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.