Runways · 69S

Runways at AVEY FLD headings, length, surface and ILS (69S)

AVEY FLD · LAURIER, WASHINGTON

Runway system
Non-towered
1
runway
Longest
1,975 ft
ILS
None
Surface
GRAVEL

AVEY FLD at Laurier, Washington has 1 runway. Runway 17/35 is 1,975 ft long and 40 ft wide. The surface is gravel. The runway headings are 185° and 5° magnetic. The field elevation is 1,655 ft MSL.

This airport has no control tower. No ILS runway ends are published. No LAHSO notes are published. No noise abatement notes are published. For the current runway picture before flight, check the current FAA Chart Supplement. For live weather and wind, use aviationweather.

Wind & favored runway

Favored end is picked from the current METAR wind at 69S.

Runway & wind

tap a runway
Calm
RWY 17
165°M
Head/Tail
+0 kt
Crosswind
0 kt R

Pattern entry · RWY 17

LEFT TRAFFIC
CrosswindCrosswindDownwindDownwindBaseBaseFinalFinal45° entry45° entryRWY 17 · 165° · LEFT TRAFFICPattern 2,655 ft MSL

All runways

RunwayHeading (°M)LengthWidthSurfaceTraffic
17/35165° / 345°1,975 ft40 ftGRAVELStandard L

Traffic pattern

Pattern altitude is not published. Use standard 1,000 ft AGL for light piston operations unless local guidance says otherwise. At this non-towered field, pilots self-announce and sequence with other traffic. Runway 17/35 is the only runway listed, so pattern work will center on that strip. Use normal traffic pattern discipline and watch for other aircraft in the pattern and on the gravel surface.

Every end, one page

Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.

Frequently asked questions

How many runways does 69S have?
69S has 1 runway.
What is the longest runway at AVEY FLD?
Runway 17/35 is the longest runway. It is 1,975 ft long.
What surface is used at 69S?
The runway surface is gravel.
Does 69S have any ILS runway ends?
No ILS runway ends are published for 69S.
Is AVEY FLD towered?
No. AVEY FLD has no control tower.
What are the runway headings at 69S?
Runway 17/35 has magnetic headings of 185° and 5°.