Seaside Muni (56S) in Seaside, Oregon has 1 runway. Runway 16/34 is 2,211 ft long and 50 ft wide. The surface is asphalt. The airport field elevation is 12 ft MSL. No control tower is published for the field.
No ILS runway ends are published for 56S. That matters for planning. Expect non-precision operations only unless you have other approved guidance. No runway-specific noise abatement notes are published. No LAHSO notes are published. The runway headings are 179.890578326583° and 359.890578326583° magnetic. Use the current FAA Chart Supplement for the latest airport data before departure.
Wind & favored runway
Favored end is picked from the current METAR wind at 56S.
Pattern entry · RWY 16
LEFT TRAFFICAll runways
Traffic pattern
Pattern altitude is not published. For light piston planning, use the standard 1,000 ft AGL pattern unless local procedures or ATC say otherwise. At 56S, that works out to about 1,012 ft MSL based on the 12 ft field elevation.
No tower is published for the airport. That means pilots should self-announce and sequence with other traffic. No right-traffic exception is published. No special pattern notes are published for runway 16/34. Verify current conditions with aviationweather for live METAR/TAF before you go.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.