Seneca County in Tiffin, Ohio has 1 runway. The runway is 06/24. It is 4,000 ft long and 75 ft wide with asphalt surface. The longest runway is 4,000 ft.
No control tower is published for 16G. No ILS runway ends are published. That means you should plan for non-precision operations only unless the current FAA Chart Supplement shows a change. No LAHSO notes are published. No noise abatement notes are published.
For current weather and winds, check aviationweather for live METAR/TAF before departure. Use the current FAA Chart Supplement for the latest runway and airport data.
Wind & favored runway
Favored end is picked from the current METAR wind at 16G.
Pattern entry · RWY 24
LEFT TRAFFICAll runways
Traffic pattern
Pattern altitude is not published. Use the standard 1,000 ft AGL for light piston traffic unless local procedure says otherwise. Field elevation is 785.9 ft MSL, so that puts a typical pattern near 1,785.9 ft MSL.
No right-traffic pattern is published. No tower is published, so pilots should self-announce and sequence visually with other traffic. Keep a close scan on final and in the pattern. Verify the current FAA Chart Supplement before flight.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.