Chase Fld Industrial in Beeville, Texas has 1 runway. Runway 13/31 is 8,000 ft long and 200 ft wide. The surface is asphalt. The runway headings are 135° and 315° magnetic. The field elevation is 184.2 ft MSL. No control tower is listed, so use standard non-towered procedures and monitor traffic closely. No ILS runway ends are published for TX2. No LAHSO notes are published. No noise abatement notes are published. For the current runway and procedure picture, check the current FAA Chart Supplement before flight.
Wind & favored runway
Favored end is picked from the current METAR wind at TX2.
Pattern entry · RWY 13
LEFT TRAFFICAll runways
Traffic pattern
Pattern altitude is not published. Use standard 1,000 ft AGL for light piston aircraft unless local guidance says otherwise. The airport is not towered, so pilots self-announce and sequence in the pattern. Runway 13/31 is the only runway, so pattern work will center on that alignment. No right-traffic exception is published. No special pattern notes are published in the facts. Verify current airport information in the current FAA Chart Supplement before you go.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.