Tampa Intl (KTPA) has 3 runways. The longest is 01L/19R at 11,002 ft. It is concrete. The other runways are 01R/19L at 8,300 ft and 10/28 at 6,999 ft. Surfaces in use are concrete and asphalt-concrete.
The field elevation is 26.5 ft MSL. The tower is open 24 hours. ILS is published for 01L, 01R, 19L and 19R. Published noise abatement procedures are in effect. Runway 19L is noise sensitive to turbojet departures. Runway 01R is noise sensitive to turbojet arrivals. Pilots should review the current FAA Chart Supplement before flight for the latest runway and airport notes.
Wind & favored runway
Favored end is picked from the current METAR wind at KTPA.
Pattern entry · RWY 01L
LEFT TRAFFICAll runways
Traffic pattern
Pattern altitude is not published. Use standard 1,000 ft AGL for light piston aircraft unless ATC assigns otherwise. The field elevation is 26.5 ft MSL. The tower is open 24 hours, so ATC sequences the pattern. Runway 19L has a noise sensitivity note for turbojet departures. Runway 01R has a noise sensitivity note for turbojet arrivals. Published noise abatement procedures are in effect. Check the current FAA Chart Supplement for the latest pattern and airport notes before departure.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.