Wilbarger County in Vernon, Texas has 2 runways. The longest is Runway 02/20 at 5,099 ft by 100 ft. It is asphalt. Runway 16/34 is 4,304 ft by 80 ft and also asphalt. No ILS runway ends are published for either runway.
This is an uncontrolled field. There is no control tower. Published runway headings are 32°/212° for 02/20 and 166°/346° for 16/34. No LAHSO notes are published. No runway-specific noise abatement notes are published. Pilots should verify current runway and wind information before departure or arrival using aviationweather for live METAR/TAF and the current FAA Chart Supplement.
Wind & favored runway
Favored end is picked from the current METAR wind at F05.
Pattern entry · RWY 16
LEFT TRAFFICAll runways
Traffic pattern
Pattern altitude is not published. For light piston operations, use standard 1,000 ft AGL unless local procedures or ATC say otherwise. This field is non-towered, so pilots self-announce and sequence in the pattern. No right-traffic exceptions are published. No runway-specific pattern notes are published. Check the current FAA Chart Supplement before flight. Then confirm winds and runway use with aviationweather for live METAR/TAF.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.