Gruver Muni (E19) in Gruver, Texas has 1 runway. Runway 02/20 is 4,698 ft long and 60 ft wide. The surface is asphalt. The field elevation is 3,205.3 ft MSL. No control tower is published for this airport.
No ILS runway ends are published for E19. That means you should plan with the current FAA Chart Supplement and the airport environment in mind. No runway-specific noise abatement notes are published. No LAHSO notes are published either. The runway layout is simple. That helps with preflight planning, but you still want current winds and weather before you go.
Wind & favored runway
Favored end is picked from the current METAR wind at E19.
Pattern entry · RWY 02
LEFT TRAFFICAll runways
Traffic pattern
Pattern altitude is not published. For light piston aircraft, use a standard 1,000 ft AGL pattern unless local guidance says otherwise. At a non-towered field like E19, self-announce clearly and keep your pattern disciplined. Runway 02/20 is the only runway, so traffic flow is straightforward. Use the current FAA Chart Supplement for any local notes before departure or arrival.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.