Runways · D06

Runways at Minto Muni headings, length and surface (D06)

MINTO MUNI · MINTO, NORTH DAKOTA

Runway system
Non-towered
1
runway
Longest
2,396 ft
ILS
None
Surface
CONC

Minto Muni (D06) has 1 runway. Runway 17/35 is 2,396 ft long and 20 ft wide. It has a concrete surface. The longest runway is 2,396 ft, so there is no runway length choice here. No ILS runway ends are published. There is no control tower. Pattern altitude is not published. Use standard 1,000 ft AGL for light piston unless local procedures say otherwise. No LAHSO notes are published. No noise abatement notes are published. Check the current FAA Chart Supplement for any updates before you go.

Wind & favored runway

Favored end is picked from the current METAR wind at D06.

Runway & wind

tap a runway
330° · 17 kt
RWY 35
354°M
Head/Tail
+15 kt
Crosswind
9 kt L

Pattern entry · RWY 35

LEFT TRAFFIC
CrosswindCrosswindDownwindDownwindBaseBaseFinalFinal45° entry45° entryRWY 35 · 354° · LEFT TRAFFICPattern 1,820 ft MSL

All runways

RunwayHeading (°M)LengthWidthSurfaceTraffic
17/35174° / 354°2,396 ft20 ftCONCStandard L

Traffic pattern

Pattern altitude is not published for D06. Use standard 1,000 ft AGL for light piston unless local procedures say otherwise. There is no control tower, so self-announce and fly a disciplined pattern. Runway 17/35 is the only runway. That keeps pattern work simple. No right-traffic exception is published. No special pattern notes are published in the facts.

Every end, one page

Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.

Frequently asked questions

How many runways does D06 have?
D06 has 1 runway. It is Runway 17/35.
What is the longest runway at Minto Muni?
The longest runway at Minto Muni is Runway 17/35. It is 2,396 ft long.
What surface is the runway at D06?
Runway 17/35 is concrete.
Does D06 have an ILS?
No ILS runway ends are published for D06.
Is there a control tower at Minto Muni?
No. D06 does not have a control tower.
What is the pattern altitude at D06?
Pattern altitude is not published. Use standard 1,000 ft AGL for light piston unless local procedures say otherwise.