Willard Airport (8G1) in Willard, Ohio has 1 runway. Runway 10/28 is 4,028 ft long and 65 ft wide. The surface is asphalt. The published magnetic headings are 97° for Runway 10 and 277° for Runway 28. The field elevation is 966.6 ft MSL. No control tower is listed, so use standard non-towered procedures and monitor the CTAF as appropriate.
No ILS runway ends are published for 8G1. No LAHSO notes are published. No noise abatement notes are published. Pilots should verify current runway and wind information before departure or arrival. For the latest airport details, use the current FAA Chart Supplement. For live METAR or TAF, use aviationweather.
Wind & favored runway
Favored end is picked from the current METAR wind at 8G1.
Pattern entry · RWY 28
LEFT TRAFFICAll runways
Traffic pattern
Pattern altitude is not published. Use standard 1,000 ft AGL for light piston operations unless local procedures or ATC say otherwise. At an untowered field, pilots self-announce and sequence by see-and-avoid. Expect normal left traffic unless the airport or ATC publishes a different pattern. No right-traffic exception is published for 8G1. No runway-specific pattern notes are published. Keep the pattern tight and predictable. Verify the active runway with winds, traffic and the current FAA Chart Supplement before joining.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.