Runways · 7G8

Runways at Geauga County headings length surface and ILS (7G8)

GEAUGA COUNTY · MIDDLEFIELD, OHIO

Runway system
Non-towered
1
runway
Longest
3,500 ft
ILS
None
Surface
ASPH

Geauga County (7G8) in Middlefield, Ohio has 1 runway. Runway 11/29 is 3,500 ft long and 65 ft wide. The surface is asphalt. The runway headings are 100° and 280° magnetic. The field elevation is 1,174.3 ft MSL.

This airport has no control tower. No ILS runway ends are published for 7G8. No LAHSO notes are published. No noise abatement notes are published. For the current airport data, use the current FAA Chart Supplement.

Wind & favored runway

Favored end is picked from the current METAR wind at 7G8.

Runway & wind

tap a runway
320° · 5 kt
RWY 29
271°M
Head/Tail
+4 kt
Crosswind
3 kt R

Pattern entry · RWY 29

LEFT TRAFFIC
CrosswindCrosswindDownwindDownwindBaseBaseFinalFinal45° entry45° entryRWY 29 · 271° · LEFT TRAFFICPattern 2,174 ft MSL

All runways

RunwayHeading (°M)LengthWidthSurfaceTraffic
11/2991° / 271°3,500 ft65 ftASPHStandard L

Traffic pattern

The pattern altitude is 1,025 ft AGL. That is 2,199.3 ft MSL. No right-traffic exceptions are published for 7G8. No tower is on field, so pilots should self-announce and fly the published pattern. Use standard traffic pattern procedures unless ATC gives other instructions. No pattern-specific notes are published in the facts.

Every end, one page

Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.

Frequently asked questions

How many runways does 7G8 have?
7G8 has 1 runway.
What is the longest runway at Geauga County?
Runway 11/29 is the longest runway. It is 3,500 ft long.
What surface is the runway at 7G8?
The runway surface is asphalt.
Does 7G8 have any ILS runway ends?
No ILS runway ends are published for 7G8.
Is Geauga County towered?
No. 7G8 does not have a control tower.
What is the traffic pattern altitude at 7G8?
The pattern altitude is 1,025 ft AGL. That is 2,199.3 ft MSL.
7G8 runways headings length surface ILS