Big Timber at Howard Fld (6S0) has 2 runways. The longest is Runway 06/24 at 5,285 ft by 75 ft, with an asphalt surface. Runway 18/36 is 3,475 ft by 75 ft and turf. No ILS is published for either runway end.
This field sits at 4,493.9 ft MSL in Big Timber, Montana. There is no control tower. No runway-specific noise abatement notes are published. No LAHSO notes are published. Pilots should use the current FAA Chart Supplement for the latest published airport data before flight.
Wind & favored runway
Favored end is picked from the current METAR wind at 6S0.
Pattern entry · RWY 36
LEFT TRAFFICAll runways
Traffic pattern
Pattern altitude is not published. For light piston operations, use standard 1,000 ft AGL unless local procedures or ATC say otherwise. At this non-towered field, pilots self-announce and sequence themselves in the pattern. Runway 06/24 is the longest runway and the asphalt surface. Runway 18/36 is turf. Check winds and traffic before joining. Use standard pattern discipline and make your intentions clear on CTAF.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.