Seneca Muni (62K) has 1 runway. Runway 18/36 is 2,400 ft long and 100 ft wide. The surface is turf. The magnetic headings are 185° and 5°. The field elevation is 1,291 ft MSL.
This airport has no control tower. No ILS runway ends are published. That means you should plan for nonprecision operations and check current conditions before departure. No LAHSO notes are published. No noise abatement notes are published. For the latest airport and procedure details, use the current FAA Chart Supplement.
Wind & favored runway
Favored end is picked from the current METAR wind at 62K.
Pattern entry · RWY 36
LEFT TRAFFICAll runways
Traffic pattern
Pattern altitude is not published. For light piston aircraft, use a standard 1,000 ft AGL pattern unless local guidance says otherwise. That puts the pattern near 2,291 ft MSL at this field elevation.
This airport has no control tower. Pilots should self-announce and sequence with other traffic. Runway 18/36 is the only runway, so pattern work centers on that strip. Check the current FAA Chart Supplement before flight for any local pattern notes or changes.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.