KENTLAND MUNI in Kentland, Indiana has 1 runway. The runway is 09/27. It is 4,004 ft long and 60 ft wide. The surface is concrete. The longest runway is 4,004 ft, so the field has one runway length to plan around.
This airport does not have a control tower. No ILS runway ends are published. No LAHSO notes are published. No noise abatement notes are published in the facts. Pilots should use the current FAA Chart Supplement for any airport data not listed here. For weather and wind, check aviationweather for live METAR/TAF.
Wind & favored runway
Favored end is picked from the current METAR wind at 50I.
Pattern entry · RWY 27
LEFT TRAFFICAll runways
Traffic pattern
Pattern altitude is not published. For light piston aircraft, use the standard 1,000 ft AGL pattern unless local procedures or ATC say otherwise. That puts the pattern at about 1,699 ft MSL based on the field elevation of 699 ft MSL.
This airport is non-towered. Pilot traffic is self-announce and self-sequence. No right-traffic exceptions are published in the facts. No runway-specific pattern notes are published. Use standard pattern work and keep a close scan on the CTAF.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.