Willapa Harbor (2S9) in South Bend/Raymond, Washington has 1 runway. Runway 11/29 is 3,005 ft long and 52 ft wide. The surface is asphalt. Field elevation is 13 ft MSL. No control tower is published for this airport.
No ILS runway ends are published. That means you should plan with the current FAA Chart Supplement and the published runway data. No LAHSO notes are published. No runway-specific noise abatement notes are published. The runway headings listed for 11/29 are magnetic. For runway planning, use the published runway numbers and the current wind.
Wind & favored runway
Favored end is picked from the current METAR wind at 2S9.
Pattern entry · RWY 29
LEFT TRAFFICAll runways
Traffic pattern
Pattern altitude is not published. For light piston operations, use the standard 1,000 ft AGL unless local procedures or ATC say otherwise. No right-traffic exceptions are published for this airport. No runway-specific pattern notes are published.
This is an uncontrolled field. Expect self-announced pattern work and standard see-and-avoid discipline. Use the published runway alignment and keep your pattern work tight to the field when traffic allows.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.