Runways · 26A

Runways at Ashland/Lineville headings, length and surface (26A)

ASHLAND/LINEVILLE · ASHLAND/LINEVILLE, ALABAMA

Runway system
Non-towered
1
runway
Longest
4,023 ft
ILS
None
Surface
ASPH

Ashland/Lineville (26A) has 1 runway. Runway 09/27 is 4,023 ft long and 80 ft wide. The surface is asphalt. The longest runway is 4,023 ft, so there is no runway length split to compare here. No ILS runway ends are published for this field.

This is an uncontrolled airport. There is no control tower. Pattern altitude is not published. For pattern work, use the standard 1,000 ft AGL light piston pattern unless local procedures or the current FAA Chart Supplement say otherwise. No LAHSO notes are published. No runway-specific noise abatement notes are published.

Wind & favored runway

Favored end is picked from the current METAR wind at 26A.

Runway & wind

tap a runway
120° · 5 kt
RWY 09
089°M
Head/Tail
+4 kt
Crosswind
3 kt R

Pattern entry · RWY 09

LEFT TRAFFIC
CrosswindCrosswindDownwindDownwindBaseBaseFinalFinal45° entry45° entryRWY 09 · 089° · LEFT TRAFFICPattern 2,065 ft MSL

All runways

RunwayHeading (°M)LengthWidthSurfaceTraffic
09/2789° / 269°4,023 ft80 ftASPHStandard L

Traffic pattern

Pattern altitude is not published for 26A. For light piston operations, use the standard 1,000 ft AGL pattern unless the current FAA Chart Supplement says otherwise. This is an uncontrolled field, so pilots self-announce and sequence with other traffic. No right-traffic exception is published in the facts. No runway-specific pattern notes are published. Runway 09/27 is the only runway, so pattern planning is straightforward. Check the current FAA Chart Supplement before flight for any updates.

Every end, one page

Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.

Frequently asked questions

How many runways does 26A have?
26A has 1 runway. It is Runway 09/27.
What is the longest runway at Ashland/Lineville?
The longest runway at 26A is Runway 09/27 at 4,023 ft.
What surface is the runway at 26A?
The runway surface in use is asphalt.
Does 26A have an ILS runway?
No ILS runway ends are published for 26A.
Is Ashland/Lineville tower controlled?
No. 26A has no control tower.
What is the pattern altitude at 26A?
Pattern altitude is not published. For light piston operations, use the standard 1,000 ft AGL pattern unless the current FAA Chart Supplement says otherwise.