Devine Muni in Devine, Texas has 1 runway. The only runway is 17/35. It is 3,399 ft long and 60 ft wide. The surface is asphalt. The longest runway is 3,399 ft, so the field has one runway length to plan around.
No ILS runway ends are published for this airport. No control tower is listed. That means pilots should use standard non-towered procedures and self-announce on the CTAF if applicable. No runway-specific noise abatement notes are published. No LAHSO notes are published either. The field elevation is 702.2 ft MSL. Use the current FAA Chart Supplement for the latest airport data before flight.
Wind & favored runway
Favored end is picked from the current METAR wind at 23R.
Pattern entry · RWY 35
LEFT TRAFFICAll runways
Traffic pattern
Pattern altitude is not published. For light piston operations, use the standard 1,000 ft AGL unless ATC or published guidance says otherwise. At this non-towered field, pilots sequence themselves in the pattern and make position reports as needed. Runway 17/35 is the only runway, so pattern work will center on that runway. No right-traffic exception is published. No runway-specific pattern notes are published. Check the current FAA Chart Supplement before departure.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.