ROBBINS FLD in Oneonta, Alabama has 1 runway. The runway is 06/24. It is 4,203 ft long and 80 ft wide. The surface is asphalt. The longest runway is 4,203 ft, so there is no shorter runway to plan around here.
No ILS runway ends are published for 20A. No tower is on the field. That means pilots should use normal non-towered procedures and check the current FAA Chart Supplement before flight. No LAHSO notes are published. No runway-specific noise abatement notes are published.
Wind & favored runway
Favored end is picked from the current METAR wind at 20A.
Pattern entry · RWY 06
LEFT TRAFFICAll runways
Traffic pattern
Pattern altitude is not published. For light piston operations, use the standard 1,000 ft AGL pattern unless local procedures say otherwise. The field elevation is 1,124.9 ft MSL, so that puts a standard pattern near 2,124.9 ft MSL. No tower is on the field, so pilots self-announce and sequence with other traffic. No right-traffic pattern exception is published for either runway end.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.