STAMPEDE at Kantishna, Alaska has 1 runway. The runway is 15/33. It is 1,960 ft long and 40 ft wide. The surface is turf. The longest runway is 1,960 ft, so the field has one runway length to plan around.
No control tower is listed. No ILS runway ends are published. That means pilots should plan for nonprecision operations only. The runway headings are 172.331970277504° and 352.331970277504° magnetic. No LAHSO notes are published. No noise abatement notes are published. Check the current FAA Chart Supplement before flight for the latest published airport data.
Wind & favored runway
Favored end is picked from the current METAR wind at Z90.
Pattern entry · RWY 15
LEFT TRAFFICAll runways
Traffic pattern
Pattern altitude is not published. Use standard 1,000 ft AGL for light piston unless local procedures or ATC say otherwise. No control tower is listed, so self-announce and fly a disciplined pattern. The runway is 15/33. That gives you a north-south alignment with magnetic headings near 172° and 352°.
No right-traffic exception is published. No special pattern notes are published. Keep spacing tight enough for the short turf strip, but stay within normal pattern discipline. Verify winds and runway choice before joining.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.