Beaver Muni in Beaver, Utah has 2 runways. The longest is Runway 13/31 at 4,985 ft by 75 ft. It has an asphalt surface. Runway 07/25 is 2,133 ft by 50 ft. It has a dirt surface. No ILS runway ends are published for this field.
This is an uncontrolled airport. There is no control tower. The published facts do not list noise abatement notes or LAHSO procedures. Pilots should plan with the current FAA Chart Supplement before arrival. The runway layout gives you a longer paved option on 13/31. It also gives you a shorter dirt strip on 07/25. Use the runway that fits wind, performance and aircraft limits.
Wind & favored runway
Favored end is picked from the current METAR wind at U52.
Pattern entry · RWY 25
LEFT TRAFFICAll runways
Traffic pattern
The pattern altitude is not published. For light piston operations, use the standard 1,000 ft AGL unless local procedures or ATC say otherwise. At this airport, there is no control tower, so pilots self-announce and sequence themselves in the pattern. No right-traffic exceptions are published. No runway-specific pattern notes are published in the facts. Check the current FAA Chart Supplement before you fly. Confirm winds with aviationweather for live METAR or TAF.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.