Trenton-Robbinsville (N87) has 1 runway. Runway 11/29 is 4,275 ft long and 75 ft wide. The surface is asphalt. No ILS runway ends are published for this field. The airport is not towered. Pattern altitude is not published, so use the standard 1,000 ft AGL for light piston operations unless local procedures say otherwise.
One runway-specific note is published for noise abatement. For VFR departure on runway 29, climb straight ahead until reaching 700 ft AGL before turning. Runway 29 also has a right traffic pattern. Check the current FAA Chart Supplement before you go. That is the best source for any updates to runway use or local procedures.
Wind & favored runway
Favored end is picked from the current METAR wind at N87.
Pattern entry · RWY 11
LEFT TRAFFICAll runways
Traffic pattern
Pattern altitude is not published. Use 1,000 ft AGL for light piston traffic unless local procedures or ATC say otherwise. N87 is not towered, so pilots self-announce and self-sequence in the pattern. Runway 29 has right traffic. That is the published exception. The noise abatement note for runway 29 calls for a straight-ahead climb to 700 ft AGL before turning on VFR departure. Keep that in mind when planning departures and pattern work.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.