Runways · M38

Runways at Hazel Green headings, length, surface and ILS (M38)

HAZEL GREEN · HAZEL GREEN, ALABAMA

Runway system
Non-towered
1
runway
Longest
2,670 ft
ILS
None
Surface
ASPH

Hazel Green (M38) has 1 runway. Runway 07/25 is 2,670 ft long and 40 ft wide. It has an asphalt surface. The longest runway is 2,670 ft, so there is no runway length split to compare. No ILS runway ends are published for this field.

This is an uncontrolled airport. No control tower is listed. The field elevation is 814 ft MSL. No runway-specific noise abatement notes are published. No LAHSO notes are published. Pilots should use the current FAA Chart Supplement for the latest airport data before flight.

Wind & favored runway

Favored end is picked from the current METAR wind at M38.

Runway & wind

tap a runway
180° · 14 kt
RWY 25
252°M
Head/Tail
+4 kt
Crosswind
13 kt L

Pattern entry · RWY 25

LEFT TRAFFIC
CrosswindCrosswindDownwindDownwindBaseBaseFinalFinal45° entry45° entryRWY 25 · 252° · LEFT TRAFFICPattern 1,814 ft MSL

All runways

RunwayHeading (°M)LengthWidthSurfaceTraffic
07/2572° / 252°2,670 ft40 ftASPHStandard L

Traffic pattern

Pattern altitude is not published. For light piston operations, use the standard 1,000 ft AGL pattern unless local procedures or ATC say otherwise. At this non-towered field, pilots self-announce and sequence visually. No right-traffic exception is published. No runway-specific pattern notes are published. Use normal CTAF discipline and keep spacing tight but safe.

Every end, one page

Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.

Frequently asked questions

How many runways does M38 have?
M38 has 1 runway. It is Runway 07/25.
What is the longest runway at Hazel Green?
The longest runway at Hazel Green is Runway 07/25 at 2,670 ft.
What surface is on the runway at M38?
Runway 07/25 is asphalt.
Does M38 have an ILS runway?
No ILS runway ends are published for M38.
Is Hazel Green a towered airport?
No. M38 does not have a control tower listed.
What is the pattern altitude at M38?
Pattern altitude is not published. For light piston operations, use the standard 1,000 ft AGL pattern unless local procedures say otherwise.