Shelby County Airport (KEET) has 1 runway. Runway 16/34 is 5,000 ft long and 75 ft wide. The surface is asphalt. Runway headings are 157° and 337° magnetic. No ILS runway ends are published. This is a non-towered field. Pattern altitude is not published. Use standard 1,000 ft AGL for light piston unless local procedures say otherwise. Right traffic is published for Runway 34. A noise abatement area lies northwest of the airport. Plan your arrival with that in mind. Check the current FAA Chart Supplement for the latest airport remarks before flight.
Wind & favored runway
Favored end is picked from the current METAR wind at KEET.
Pattern entry · RWY 16
LEFT TRAFFICAll runways
Traffic pattern
Pattern altitude is not published. Use standard 1,000 ft AGL for light piston unless local procedures say otherwise. KEET is non-towered, so self-announce and sequence with other traffic. Runway 34 has right traffic. That is the key pattern exception at this field. Runway 16 uses the standard left pattern unless local procedures say otherwise. The published noise abatement area northwest of the airport may affect your downwind or departure planning. Verify the current FAA Chart Supplement before you go.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.