Buffalo Muni in Buffalo, Oklahoma has 1 runway. Runway 17/35 is 4,000 ft long and 60 ft wide. The surface is asphalt. The field elevation is 1,822 ft MSL. No control tower is listed, so use standard non-towered procedures and monitor CTAF as published in the current FAA Chart Supplement. No ILS runway ends are published for this airport. No LAHSO notes are published. No noise abatement notes are published. Plan performance with the 4,000 ft runway length in mind, especially on hot days or with a heavy load.
Wind & favored runway
Favored end is picked from the current METAR wind at KBFK.
Pattern entry · RWY 35
LEFT TRAFFICAll runways
Traffic pattern
Pattern altitude is not published. Use the standard 1,000 ft AGL pattern for light piston aircraft unless local procedures say otherwise. That puts the pattern near 2,822 ft MSL at this field elevation. This is a non-towered airport, so pilots self-announce and sequence visually. Runway 17/35 is the only runway. Expect normal left traffic unless the current FAA Chart Supplement or local procedures specify otherwise. Verify winds with aviationweather for live METAR/TAF before departure.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.