Henryetta Muni in Henryetta, Oklahoma has 1 runway. Runway 18/36 is 3,501 ft long and 50 ft wide. The surface is asphalt. The field elevation is 849 ft MSL. No control tower is listed. No ILS runway ends are published for this airport.
For runway planning, the single runway gives a simple layout. The published runway headings are 180° and 360° magnetic. No noise abatement notes are published. No LAHSO notes are published. Pilots should use the current FAA Chart Supplement for the latest airport data before flight.
Wind & favored runway
Favored end is picked from the current METAR wind at F10.
Pattern entry · RWY 36
LEFT TRAFFICAll runways
Traffic pattern
Pattern altitude is not published. For light piston operations, assume the standard 1,000 ft AGL pattern unless local procedures or ATC say otherwise. This airport has no control tower, so pilots self-announce and self-sequence in the pattern. The only runway is 18/36, so pattern work centers on that runway alignment. No right-traffic exception is published. No special pattern notes are published in the facts.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.