Runways · 9A0

Runways at Lumpkin County-Wimpys headings, length, surface and ILS (9A0)

LUMPKIN COUNTY-WIMPYS · DAHLONEGA, GEORGIA

Runway system
Non-towered
1
runway
Longest
3,024 ft
ILS
None
Surface
ASPH

Lumpkin County-Wimpys (9A0) has 1 runway. Runway 16/34 is 3,024 ft long and 50 ft wide. The surface is asphalt. The runway headings are 150° and 330° magnetic. No ILS runway ends are published for this field.

This is an uncontrolled airport. There is no control tower. Pattern altitude is not published. Use standard 1,000 ft AGL for light piston unless local procedures or ATC say otherwise. No runway-specific noise abatement notes are published. No LAHSO notes are published either.

Wind & favored runway

Favored end is picked from the current METAR wind at 9A0.

Runway & wind

tap a runway
120° · 8 kt
RWY 16
147°M
Head/Tail
+7 kt
Crosswind
4 kt L

Pattern entry · RWY 16

LEFT TRAFFIC
CrosswindCrosswindDownwindDownwindBaseBaseFinalFinal45° entry45° entryRWY 16 · 147° · LEFT TRAFFICPattern 2,329 ft MSL

All runways

RunwayHeading (°M)LengthWidthSurfaceTraffic
16/34147° / 327°3,024 ft50 ftASPHStandard L

Traffic pattern

Pattern altitude is not published for 9A0. Use standard 1,000 ft AGL for light piston unless local procedures say otherwise. The field is uncontrolled, so pilots self-announce and sequence visually. Runway 16/34 is the only runway. The published magnetic headings are 150° and 330°. No right-traffic exception is published. No runway-specific pattern notes are published.

Every end, one page

Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.

Frequently asked questions

How many runways does 9A0 have?
9A0 has 1 runway. It is Runway 16/34.
What is the longest runway at Lumpkin County-Wimpys?
The longest runway is 16/34 at 3,024 ft.
What surface is the runway at 9A0?
The runway surface is asphalt.
Does 9A0 have any ILS runway ends?
No ILS runway ends are published for 9A0.
Is Lumpkin County-Wimpys towered?
No. There is no control tower at 9A0.
What is the runway heading at 9A0?
Runway 16/34 has published magnetic headings of 150° and 330°.
What pattern altitude should I use at 9A0?
Pattern altitude is not published. Use standard 1,000 ft AGL for light piston unless local procedures say otherwise.