Runways · 8I3

Runways at GLENNDALE headings, length and surface (8I3)

GLENNDALE · KOKOMO, INDIANA

Runway system
Non-towered
1
runway
Longest
2,048 ft
ILS
None
Surface
TURF

GLENNDALE in Kokomo, Indiana has 1 runway. Runway 18/36 is 2,048 ft long and 110 ft wide. It is turf. The longest runway is 2,048 ft, so there is no longer option on the field.

There is no control tower at 8I3. No ILS runway ends are published. That means this is a simple runway setup for VFR planning. The published runway headings are 180° and 0° magnetic. No LAHSO notes are published. No noise abatement notes are published. Check the current FAA Chart Supplement before you go. Use aviationweather for live METAR/TAF if you need current wind and weather.

Wind & favored runway

Favored end is picked from the current METAR wind at 8I3.

Runway & wind

tap a runway
140° · 15 kt
RWY 18
178°M
Head/Tail
+12 kt
Crosswind
10 kt L

Pattern entry · RWY 18

LEFT TRAFFIC
CrosswindCrosswindDownwindDownwindBaseBaseFinalFinal45° entry45° entryRWY 18 · 178° · LEFT TRAFFICPattern 1,850 ft MSL

All runways

RunwayHeading (°M)LengthWidthSurfaceTraffic
18/36178° / 358°2,048 ft110 ftTURFStandard L

Traffic pattern

Pattern altitude is not published. For light piston operations, use the standard 1,000 ft AGL unless local procedures or ATC say otherwise. The field elevation is 850 ft MSL, so that puts a standard pattern near 1,850 ft MSL.

There is no control tower at 8I3. Expect self-announced traffic and standard non-towered pattern discipline. No right-traffic exception is published. No special pattern notes are published in the facts. Check the current FAA Chart Supplement before flight.

Every end, one page

Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.

Frequently asked questions

What is the longest runway at 8I3?
Runway 18/36. It is 2,048 ft long.
How many runways does GLENNDALE have?
GLENNDALE has 1 runway.
What surface is the runway at 8I3?
The runway surface is turf.
Does 8I3 have an ILS?
No ILS runway ends are published for 8I3.
Is there a control tower at GLENNDALE?
No. 8I3 is not tower controlled.
What are the runway headings at 8I3?
Runway 18/36 is aligned 180° and 0° magnetic.