Canton Muni (7G9) in Canton, South Dakota has 1 runway. The sole runway is 18/36. It is 3,600 ft long and 60 ft wide. The surface is asphalt. The runway headings are 180° and 0° magnetic.
The field elevation is 1,290 ft MSL. No control tower is published for this airport. No ILS runway ends are published. No LAHSO notes are published. No noise abatement notes are published. Pilots should use the current FAA Chart Supplement for the latest airport details before flight.
Wind & favored runway
Favored end is picked from the current METAR wind at 7G9.
Pattern entry · RWY 36
LEFT TRAFFICAll runways
Traffic pattern
Pattern altitude is not published. Use standard 1,000 ft AGL for light piston aircraft unless ATC or published procedures say otherwise. This airport is not towered, so pilots self-announce and self-sequence in the pattern. The runway is 18/36, so expect northbound and southbound pattern work as traffic and wind favor. Check the current FAA Chart Supplement before departure for any airport-specific pattern guidance.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.