Diamondhead (66Y) has 1 runway. Runway 18/36 is 3,800 ft long and 75 ft wide with an asphalt surface. The longest runway is 3,800 ft. No ILS runway ends are published for this field. There is no control tower.
The runway headings are 180° and 360° magnetic. Pattern altitude is not published. For light piston operations, use the standard 1,000 ft AGL pattern unless the airport or ATC gives different instructions. No runway-specific LAHSO notes are published. No noise abatement notes are published. Pilots should verify current conditions in the current FAA Chart Supplement before flight.
Wind & favored runway
Favored end is picked from the current METAR wind at 66Y.
Pattern entry · RWY 18
LEFT TRAFFICAll runways
Traffic pattern
Pattern altitude is not published. For light piston aircraft, use the standard 1,000 ft AGL pattern unless local instructions say otherwise. There is no control tower, so pilots self-announce and sequence visually. Runway 18/36 is the only runway listed. Use the published magnetic headings of 180° and 360° when planning the pattern. No right-traffic exception is published. No runway-specific pattern notes are published.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.