Runways · 5AK

Runways at Tazlina/Smokey Lake headings, length, surface and ILS (5AK)

TAZLINA/SMOKEY LAKE · TAZLINA, ALASKA

Runway system
Non-towered
1
runway
Longest
2,280 ft
ILS
None
Surface
WATER

Tazlina/Smokey Lake (5AK) in Tazlina, Alaska has 1 runway. The field elevation is 2,415.4 ft MSL. The only runway is 06W/24W. It is 2,280 ft long and 600 ft wide. The surface is water. No ILS runway ends are published. No tower is listed, so operations are non-towered. No LAHSO notes are published. No noise abatement notes are published. Pilots should use the current FAA Chart Supplement for the latest airport data before flight.

Wind & favored runway

Favored end is picked from the current METAR wind at 5AK.

Runway & wind

tap a runway
190° · 4 kt
RWY 24W
219°M
Head/Tail
+2 kt
Crosswind
3 kt L

Pattern entry · RWY 24W

LEFT TRAFFIC
CrosswindCrosswindDownwindDownwindBaseBaseFinalFinal45° entry45° entryRWY 24W · 219° · LEFT TRAFFICPattern 3,415 ft MSL

All runways

RunwayHeading (°M)LengthWidthSurfaceTraffic
06W/24W39° / 219°2,280 ft600 ftWATERStandard L

Traffic pattern

Pattern altitude is not published. For light piston operations, use the standard 1,000 ft AGL unless local procedures say otherwise. This airport is non-towered, so pilots self-announce and sequence visually. The published runway is 06W/24W. Use the listed magnetic runway directions for pattern planning. No right-traffic exception is published. No special pattern notes are published in the facts.

Every end, one page

Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.

Frequently asked questions

How many runways does 5AK have?
5AK has 1 runway.
What is the longest runway at 5AK?
The longest runway at 5AK is 06W/24W at 2,280 ft.
What surface is the runway at Tazlina/Smokey Lake?
The published runway surface is water.
Does 5AK have any ILS runway ends?
No ILS runway ends are published for 5AK.
Is 5AK tower controlled?
No. The airport is non-towered.
What is the pattern altitude at 5AK?
Pattern altitude is not published. For light piston operations, use the standard 1,000 ft AGL unless local procedures say otherwise.