Hawkinsville-Pulaski County (51A) has 1 runway. Runway 10/28 is 3,000 ft long and 60 ft wide with an asphalt surface. The longest runway is 3,000 ft. No ILS runway ends are published for this field. The airport has no control tower. Pattern altitude is not published. Use standard 1,000 ft AGL for light piston unless the current FAA Chart Supplement or ATC gives different guidance. No runway-specific noise abatement notes are published. No LAHSO notes are published.
Wind & favored runway
Favored end is picked from the current METAR wind at 51A.
Pattern entry · RWY 10
LEFT TRAFFICAll runways
Traffic pattern
Pattern altitude is not published for 51A. Use standard 1,000 ft AGL for light piston unless the current FAA Chart Supplement says otherwise. The airport has no control tower, so pilots should self-announce and sequence visually. The published runway is 10/28. Runway headings are 99° and 279° magnetic. No right-traffic exception is published. No runway-specific pattern notes are published.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.