Ticonderoga Muni (4B6) has 1 runway. Runway 02/20 is 4,041 ft long and 60 ft wide. The surface is asphalt. The airport sits at 273.6 ft MSL. No control tower is published for this field.
No ILS runway ends are published for 4B6. That makes this a simple runway setup, but you still want to brief the wind and pattern before arrival. Runway 20 has right traffic published. Runway 02 uses the opposite pattern. No LAHSO notes are published. No noise abatement notes are published. Check the current FAA Chart Supplement before flight for the latest airport data.
Wind & favored runway
Favored end is picked from the current METAR wind at 4B6.
Pattern entry · RWY 20
RIGHT TRAFFICAll runways
Traffic pattern
Pattern altitude is not published. For light piston operations, use the standard 1,000 ft AGL unless ATC or local guidance says otherwise. At this non-towered airport, self-announce and sequence with other traffic. Runway 20 has right traffic published. Runway 02 uses left traffic by default. The single runway layout keeps pattern work straightforward, but you still need to watch for opposite-direction traffic on the same strip. Use the current FAA Chart Supplement for the latest published pattern notes.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.