Runways · 47K

Runways at Moundridge Muni headings, length and surface (47K)

MOUNDRIDGE MUNI · MOUNDRIDGE, KANSAS

Runway system
Non-towered
1
runway
Longest
3,405 ft
ILS
None
Surface
ASPH

Moundridge Muni (47K) in Moundridge, Kansas has 1 runway. Runway 17/35 is 3,405 ft long and 50 ft wide. The surface is asphalt. Runway headings are 180° and 0° magnetic. No ILS runway ends are published for this field.

This is a non-towered airport. There are no published tower hours. Pattern altitude is not published. For light piston work, use the standard 1,000 ft AGL pattern unless local procedures say otherwise. No runway-specific noise abatement notes are published. No LAHSO notes are published.

Wind & favored runway

Favored end is picked from the current METAR wind at 47K.

Runway & wind

tap a runway
020° · 14 kt
RWY 35
353°M
Head/Tail
+13 kt
Crosswind
5 kt R

Pattern entry · RWY 35

LEFT TRAFFIC
CrosswindCrosswindDownwindDownwindBaseBaseFinalFinal45° entry45° entryRWY 35 · 353° · LEFT TRAFFICPattern 2,489 ft MSL

All runways

RunwayHeading (°M)LengthWidthSurfaceTraffic
17/35173° / 353°3,405 ft50 ftASPHStandard L

Traffic pattern

Pattern altitude is not published for 47K. For light piston operations, use the standard 1,000 ft AGL pattern unless local procedures say otherwise. This is a non-towered field, so pilots self-announce and build the pattern with normal CTAF discipline. No right-traffic exceptions are published. No runway-specific pattern notes are published. No tower is on site to sequence traffic.

Every end, one page

Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.

Frequently asked questions

How many runways does Moundridge Muni have?
47K has 1 runway.
What is the longest runway at 47K?
The longest runway is 17/35 at 3,405 ft.
What surface is the runway at Moundridge Muni?
The runway surface is asphalt.
Does 47K have any ILS runway ends?
No ILS runway ends are published.
Is Moundridge Muni towered?
No. 47K is a non-towered airport.
What is the pattern altitude at 47K?
Pattern altitude is not published. For light piston operations, use the standard 1,000 ft AGL pattern unless local procedures say otherwise.