Kentmorr Airpark (3W3) in Stevensville, Maryland has 1 runway. The runway is 10/28. It is 2,400 ft long and 75 ft wide. The surface is turf. The field elevation is 10 ft MSL. No control tower is published for this airport.
No ILS runway ends are published. That matters for planning. Expect visual operations only unless you have other approved guidance. The published noise abatement note favors runway 28 for the 90 degree crosswind case. The same note also favors runway 28 for calm or crosswind use. Check the current FAA Chart Supplement before flight for any updates.
Wind & favored runway
Favored end is picked from the current METAR wind at 3W3.
Pattern entry · RWY 28
LEFT TRAFFICAll runways
Traffic pattern
Published pattern altitude is 990 ft AGL. That is 1,000 ft MSL at this field elevation. No tower is published, so pilots should self-announce and sequence using standard non-towered procedures. The only runway-specific pattern note in the facts is the noise abatement preference for runway 28 in calm or crosswind conditions. The same note also calls for runway 28 as the preferred 90 degree crosswind runway. Fly the published pattern and coordinate with other traffic early.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.