Pineville Muni (2L0) in Pineville, Louisiana has 1 runway. Runway 18/36 is 3,000 ft long and 75 ft wide. The surface is asphalt. The field elevation is 100 ft MSL. No control tower is published for this airport, so use standard non-towered procedures and monitor the CTAF if applicable. No ILS runway ends are published. No runway-specific noise abatement notes are published. No LAHSO notes are published. The runway headings are 180.543748980445° and 0.543748980445002° magnetic. That gives you a simple north-south layout for planning.
Wind & favored runway
Favored end is picked from the current METAR wind at 2L0.
Pattern entry · RWY 18
LEFT TRAFFICAll runways
Traffic pattern
Pattern altitude is not published. For light piston operations, use 1,000 ft AGL as the standard pattern altitude. At this field elevation of 100 ft MSL, that is about 1,100 ft MSL. No right-traffic exceptions are published. No runway-specific pattern notes are published. With no control tower, pilots self-announce and sequence visually. Keep the pattern tight and predictable. Confirm runway use with the current FAA Chart Supplement before flight if you need the latest published details.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.