Kent State University (1G3) has 1 runway. Runway 02/20 is 4,000 ft long and 60 ft wide. The surface is asphalt. Runway headings are 9° and 189° magnetic. The field elevation is 1,134.5 ft MSL.
There is no control tower at 1G3. No ILS runway ends are published for this airport. The published runway system is simple. That helps with preflight planning. Noise abatement procedures are published. For those procedures, call the airport manager.
The longest runway is 4,000 ft. The shortest runway is also 4,000 ft. Pilots should verify current airport details in the current FAA Chart Supplement before flight.
Wind & favored runway
Favored end is picked from the current METAR wind at 1G3.
Pattern entry · RWY 20
LEFT TRAFFICAll runways
Traffic pattern
Pattern altitude at 1G3 is 850 ft AGL. That is 1,984.5 ft MSL. With no control tower, pilots should self-announce and fly the published pattern as appropriate for the runway in use. The airport has one runway, so pattern work is straightforward.
No right-traffic exception is published in the facts provided. No special pattern altitude changes are published either. Use standard traffic awareness and keep noise abatement in mind. For noise abatement procedures, call the airport manager before flight.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.