Runways · 0G7

Runways at Finger Lakes Rgnl headings, length, surface and ILS (0G7)

FINGER LAKES RGNL · SENECA FALLS, NEW YORK

Runway system
Non-towered
2
runways
Longest
4,592 ft
ILS
None
Surface
ASPH · TURF

Finger Lakes Rgnl in Seneca Falls, New York has 2 runways. The longest is 01/19 at 4,592 ft by 75 ft. It is asphalt. The other runway is 11/29 at 1,850 ft by 60 ft. It is turf. No ILS runway ends are published for 0G7.

This is an uncontrolled field. There is no control tower. Pattern altitude is not published. For light piston operations, use standard 1,000 ft AGL unless the current FAA Chart Supplement or local procedures say otherwise. No LAHSO notes are published. No runway-specific noise abatement notes are published.

Wind & favored runway

Favored end is picked from the current METAR wind at 0G7.

Runway & wind

tap a runway
140° · 6 kt
RWY 19
163°M
Head/Tail
+5 kt
Crosswind
3 kt L

Pattern entry · RWY 19

LEFT TRAFFIC
CrosswindCrosswindDownwindDownwindBaseBaseFinalFinal45° entry45° entryRWY 19 · 163° · LEFT TRAFFICPattern 1,492 ft MSL

All runways

RunwayHeading (°M)LengthWidthSurfaceTraffic
01/19343° / 163°4,592 ft75 ftASPHStandard L
11/2984° / 264°1,850 ft60 ftTURFStandard L

Traffic pattern

Pattern altitude is not published for 0G7. For light piston aircraft, use standard 1,000 ft AGL unless the current FAA Chart Supplement or local procedures say otherwise. There is no control tower, so pilots self-announce and self-sequence in the pattern. The published runways are 01/19 and 11/29. Runway 11/29 is turf and shorter. Check winds and runway condition before choosing it. No right-traffic exceptions are published. No runway-specific pattern notes are published.

Every end, one page

Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.

Frequently asked questions

How many runways does 0G7 have?
0G7 has 2 runways. They are 01/19 and 11/29.
What is the longest runway at Finger Lakes Rgnl?
Runway 01/19 is the longest runway at 0G7. It is 4,592 ft long.
What surface is runway 01/19 at 0G7?
Runway 01/19 is asphalt.
What surface is runway 11/29 at 0G7?
Runway 11/29 is turf.
Does 0G7 have any ILS runway ends?
No ILS runway ends are published for 0G7.
Is Finger Lakes Rgnl tower controlled?
No. 0G7 does not have a control tower.
What is the pattern altitude at 0G7?
Pattern altitude is not published. For light piston aircraft, use standard 1,000 ft AGL unless the current FAA Chart Supplement says otherwise.
0G7 runways headings, length, surface, ILS