Lansdowne (04G) in Youngstown, Ohio has one runway. Runway 02/20 is 3,073 ft long and 50 ft wide. The surface is asphalt. The published magnetic headings are 16° and 196°. No ILS runway ends are published for this field. No tower is listed, so expect non-towered operations and self-announced traffic. The field elevation is 1,043.8 ft MSL.
No LAHSO notes are published. No noise abatement notes are published. Pilots should use the current FAA Chart Supplement for the latest airport data before flight.
Wind & favored runway
Favored end is picked from the current METAR wind at 04G.
Pattern entry · RWY 20
LEFT TRAFFICAll runways
Traffic pattern
Pattern altitude is not published. For light piston operations, use the standard 1,000 ft AGL unless local procedures say otherwise. That puts the pattern near 2,044 ft MSL based on the field elevation of 1,043.8 ft MSL. No right-traffic exception is published. No tower is listed, so pilots should self-announce and sequence with other traffic. Use the current FAA Chart Supplement for the latest pattern and airport notes.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.