Sebastian Muni (X26) has 2 runways. The longest is Runway 05/23 at 4,023 ft by 75 ft. Runway 10/28 is 3,199 ft by 75 ft. Both runways are asphalt. No ILS runway ends are published for this field. The airport is not towered. Field elevation is 21.5 ft MSL.
Noise abatement procedures are in effect. Pilots should contact the airport manager at 772-633-0897 for details before operating. Runway 10/28 has right traffic for Runway 28. Runway 05/23 has right traffic for Runway 23. Check the current FAA Chart Supplement for the latest published airport data before flight.
Wind & favored runway
Favored end is picked from the current METAR wind at X26.
Pattern entry · RWY 05
LEFT TRAFFICAll runways
Traffic pattern
Pattern altitude is not published. Use standard 1,000 ft AGL for light piston unless ATC or published procedures say otherwise. Field elevation is 21.5 ft MSL, so that puts a standard light-airplane pattern near 1,021.5 ft MSL. This airport is not towered, so pilots self-announce and self-sequence in the pattern. Runway 10/28 has right traffic for Runway 28. Runway 05/23 has right traffic for Runway 23. Noise abatement procedures are in effect, so brief the pattern before arrival and review the current FAA Chart Supplement.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.