Runways · M94

Runways at Desert Aire Rgnl headings, length and surface (M94)

DESERT AIRE RGNL · MATTAWA, WASHINGTON

Runway system
Non-towered
1
runway
Longest
3,665 ft
ILS
None
Surface
ASPH

Desert Aire Rgnl in Mattawa, Washington has 1 runway. Runway 10/28 is 3,665 ft long and 60 ft wide. The surface is asphalt. The airport is not towered, so pilots should self-announce and use standard non-towered procedures. No ILS runway ends are published for this field. No runway-specific noise abatement notes are published. The runway heading data in the FAA source shows magnetic directions for 10/28. For current wind and weather, check aviationweather for live METAR/TAF before departure.

Wind & favored runway

Favored end is picked from the current METAR wind at M94.

Runway & wind

tap a runway
320° · 10 kt
RWY 28
277°M
Head/Tail
+9 kt
Crosswind
4 kt R

Pattern entry · RWY 28

LEFT TRAFFIC
CrosswindCrosswindDownwindDownwindBaseBaseFinalFinal45° entry45° entryRWY 28 · 277° · LEFT TRAFFICPattern 1,586 ft MSL

All runways

RunwayHeading (°M)LengthWidthSurfaceTraffic
10/2897° / 277°3,665 ft60 ftASPHStandard L

Traffic pattern

Pattern altitude is not published. For light piston operations, use the standard 1,000 ft AGL pattern unless local procedures or ATC say otherwise. At this non-towered airport, pilots sequence themselves in the pattern and on final. Keep your calls clear and concise. No right-traffic exception is published. No runway-specific pattern notes are published in the facts.

Every end, one page

Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.

Frequently asked questions

How many runways does M94 have?
M94 has 1 runway.
What is the longest runway at Desert Aire Rgnl?
Runway 10/28 is the longest runway. It is 3,665 ft long.
What surface is the runway at M94?
The runway surface is asphalt.
Does M94 have an ILS runway?
No ILS runway ends are published for M94.
Is Desert Aire Rgnl towered?
No. M94 does not have a control tower.
What pattern altitude should I use at M94?
Pattern altitude is not published. For light piston aircraft, use the standard 1,000 ft AGL pattern unless local procedures say otherwise.