Batesville has 1 runway. Runway 18/36 is 5,933 ft long and 100 ft wide. The surface is asphalt. The field elevation is 975 ft MSL. No control tower is listed, so use standard non-towered procedures and self-announce on CTAF as appropriate.
No ILS runway ends are published for KHLB. That matters for planning in lower ceilings or reduced visibility. The runway layout is simple. One runway. One surface type. No published LAHSO notes. No published noise abatement notes. Check the current FAA Chart Supplement for the latest airport remarks before you go.
Wind & favored runway
Favored end is picked from the current METAR wind at KHLB.
Pattern entry · RWY 36
LEFT TRAFFICAll runways
Traffic pattern
Pattern altitude is not published. Use the standard 1,000 ft AGL pattern altitude for light piston aircraft unless local procedures say otherwise. That puts the pattern near 1,975 ft MSL at this field elevation of 975 ft MSL.
No tower is present. Pilots sequence themselves. Make standard radio calls and watch for opposite-direction traffic on the single runway. No right-traffic exception is published. No special pattern notes are published in the facts.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.