Runway 10 at KELM is the 10 end at ELMIRA/CORNING RGNL in Elmira/Corning, New York. The opposite end is Runway 28. This end has a magnetic heading of 89°. Runway 10 is 5,404 ft long and 150 ft wide. Surface is asphalt. Pattern direction is left traffic, standard. No ILS is published for Runway 10. KELM is a controlled field with a tower. For current NOTAM and runway condition before departure, check the current FAA Chart Supplement.
Wind component for Runway 10
Based on the current METAR wind at KELM.
- Headwind
- 3.4 kt
- Crosswind
- 6.1 kt RIGHT
- Rel. angle
- 61°
- Favorability
- marginal
Pattern entry · RWY 10
LEFT TRAFFICTraffic pattern · Runway 10
LEFT-hand pattern on the north/west side. Tower-controlled. Follow ATC instructions for pattern entry.
- Upwind: climb runway heading 77°M
- Crosswind: turn left to 347°M
- Downwind: parallel runway, opposite direction (257°M)
- Base: perpendicular to runway
- Final: align with 77°M for Runway 10
Frequently asked questions
What is the heading of runway 10 at KELM?
Runway 10 has a magnetic heading of 89°. That is the published runway heading for this end.
Is runway 10 at KELM left or right traffic?
Runway 10 uses left traffic, standard. Use the published pattern unless ATC assigns otherwise.
What is the length of runway 10 at KELM?
Runway 10 is 5,404 ft long. Width is 150 ft.
What is the surface of runway 10 at KELM?
Surface is asphalt.
Does runway 10 have an ILS approach at KELM?
No ILS is published for Runway 10.
What is the opposite end of runway 10 at KELM?
The opposite end is Runway 28.
What airport is runway 10 at KELM part of?
Runway 10 is at ELMIRA/CORNING RGNL in Elmira/Corning, New York. The airport ICAO is KELM.