Huber Airpark Civic Club LLC in Seguin, Texas has 1 runway. The runway is 18/36. It is 3,415 ft long and 50 ft wide. The surface is asphalt. The airport elevation is 556 ft MSL. No control tower is published for this field.
No ILS runway ends are published for E70. That means pilots should plan for non-precision or visual operations unless the current FAA Chart Supplement or published IAP says otherwise. No LAHSO notes are published. No noise abatement notes are published. The runway layout is simple. One strip. One direction pair. Check the current FAA Chart Supplement for any updates before you go.
Wind & favored runway
Favored end is picked from the current METAR wind at E70.
Pattern entry · RWY 18
LEFT TRAFFICAll runways
Traffic pattern
Pattern altitude is not published. Use standard 1,000 ft AGL for light piston traffic unless local procedures say otherwise. That puts the pattern at about 1,556 ft MSL based on the field elevation of 556 ft MSL. No right-traffic exception is published. No tower is published for E70, so expect self-announced pattern work and standard see-and-avoid discipline. Verify the current FAA Chart Supplement before flight.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.