Lancaster Muni in Lancaster, Wisconsin has 1 runway. Runway 18/36 is 3,300 ft long and 60 ft wide with asphalt surface. The published magnetic headings are 179° and 359°. No ILS runway ends are published. No tower is listed, so use standard non-towered procedures and monitor traffic closely. No LAHSO notes are published. No noise abatement notes are published. For current airport details, use the current FAA Chart Supplement. For live weather and winds, use aviationweather.
Wind & favored runway
Favored end is picked from the current METAR wind at 73C.
Pattern entry · RWY 18
LEFT TRAFFICAll runways
Traffic pattern
Pattern altitude is not published. Use the standard 1,000 ft AGL pattern for light piston aircraft unless local procedures or ATC say otherwise. The field elevation is 1,015.6 ft MSL, so that puts a standard pattern near 2,016 ft MSL. This is a non-towered field. Self-announce clearly on CTAF and keep traffic scanning tight. No right-traffic pattern is published for either runway end. No special pattern notes are published in the facts.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.