Boundary County (65S) in Bonners Ferry, Idaho has one runway. Runway 02/20 is 4,002 ft long and 75 ft wide. The surface is asphalt. The published magnetic headings are 38° for Runway 02 and 218° for Runway 20.
There is no control tower. No ILS runway ends are published for this field. The runway system is simple, so planning is mostly about wind, density altitude and runway length. The field elevation is 2,337.1 ft MSL, so performance planning matters. No LAHSO notes are published. No noise abatement notes are published.
Wind & favored runway
Favored end is picked from the current METAR wind at 65S.
Pattern entry · RWY 02
LEFT TRAFFICAll runways
Traffic pattern
Pattern altitude is not published. For light piston traffic, use the standard 1,000 ft AGL pattern unless the current FAA Chart Supplement or local procedures say otherwise. There is no control tower, so pilots self-announce and sequence themselves in the pattern.
No right-traffic exception is published in the facts. No special pattern notes are published. Keep your scan tight on final and in the pattern. With one runway only, expect straightforward arrivals and departures, but always check winds and traffic before joining.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.