Runways · 1X1

Runways at Higgins/Lipscomb County headings length and surface (1X1)

HIGGINS/LIPSCOMB COUNTY · HIGGINS, TEXAS

Runway system
Non-towered
1
runway
Longest
3,969 ft
ILS
None
Surface
ASPH

Higgins/Lipscomb County (1X1) has 1 runway. Runway 18/36 is 3,969 ft long and 60 ft wide. The surface is asphalt. Runway headings are 191° and 11° magnetic. The field elevation is 2,565.5 ft MSL.

There is no control tower at 1X1. No ILS runway ends are published for this field. No LAHSO notes are published. No noise abatement notes are published. Pilots should use the current FAA Chart Supplement for airport details before flight. Check aviationweather for live METAR/TAF and winds.

Wind & favored runway

Favored end is picked from the current METAR wind at 1X1.

Runway & wind

tap a runway
090° · 7 kt
RWY 36
003°M
Head/Tail
+1 kt
Crosswind
7 kt R

Pattern entry · RWY 36

LEFT TRAFFIC
CrosswindCrosswindDownwindDownwindBaseBaseFinalFinal45° entry45° entryRWY 36 · 003° · LEFT TRAFFICPattern 3,566 ft MSL

All runways

RunwayHeading (°M)LengthWidthSurfaceTraffic
18/36183° / 3°3,969 ft60 ftASPHStandard L

Traffic pattern

Pattern altitude is not published. Use the standard 1,000 ft AGL for light piston operations unless ATC or published guidance says otherwise. There is no control tower at 1X1, so traffic is self-announced. The field has one runway only. That simplifies pattern work, but it also means you need to stay sharp on runway alignment and wind check. No right-traffic exception is published. No special pattern notes are published.

Every end, one page

Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.

Frequently asked questions

How many runways does 1X1 have?
1X1 has 1 runway.
What is the longest runway at Higgins/Lipscomb County?
The longest runway is 18/36 at 3,969 ft.
What surface is the runway at 1X1?
The runway surface is asphalt.
Does 1X1 have any ILS runway ends?
No ILS runway ends are published for 1X1.
Is Higgins/Lipscomb County towered?
No. There is no control tower at 1X1.
What are the runway headings at 1X1?
Runway 18/36 has magnetic headings of 191° and 11°.