Canton-Plymouth-Mettetal (1D2) has 1 runway. The runway is 18/36. It is 2,302 ft long and 75 ft wide. The surface is asphalt. The longest runway is 2,302 ft, so the field has one runway length to plan around.
There is no control tower. ILS runway ends are not published for this airport. Runway headings are 178° and 358° magnetic. Noise-sensitive areas are north and south of the airport. The airport manager publishes noise abatement procedures. Check the current FAA Chart Supplement before you go.
Wind & favored runway
Favored end is picked from the current METAR wind at 1D2.
Pattern entry · RWY 18
LEFT TRAFFICAll runways
Traffic pattern
Pattern altitude is not published. Use the standard 1,000 ft AGL for light piston aircraft unless local procedures say otherwise. Field elevation is 696.1 ft MSL, so a standard pattern would be 1,696.1 ft MSL. There is no control tower, so pilots self-announce and self-sequence. The only runway listed is 18/36. Noise-sensitive areas are north and south of the airport. Review the airport manager’s noise abatement procedures before arrival.
Every end, one page
Each runway end has its own page with wind component, traffic pattern geometry and ILS for that specific direction.